!!!! Note: pls modify default value by HEX  mode, heading with 0x
 
typedef struct 
{
    uint8	pskey_cmd;
    uint8   g_dbg_source_sink_syn_test_data;
    uint8   g_sys_sleep_in_standby_supported;
    uint8   g_sys_sleep_master_supported;
    uint8   g_sys_sleep_slave_supported;
    uint32  default_ahb_clk;
    uint32  device_class;
    uint32  win_ext;
    uint32  g_aGainValue[6];
    uint32  g_aPowerValue[5];
    uint8   feature_set[16];
    uint8   device_addr[6];   
    uint8  g_sys_sco_transmit_mode;
    uint8  g_sys_uart0_communication_supported;
    uint8 edr_tx_edr_delay;
    uint8 edr_rx_edr_delay;
    uint32 g_PrintLevel;
    uint16 uart_rx_watermark;
    uint16 uart_flow_control_thld;
    uint32 comp_id;
	uint16 pcm_clk_divd;
	uint16 half_word_reserved;
	uint32 pcm_config;
    uint32  reserved[8];
}BT_PSKEY_CONFIG_INFO_T;

value:
{
0x5,
0,
0x1,
0x1,
0x1,
0x18cba80,
0x001f00,
0x1e,
{0,0x1,0x2,0x3,0x4,0x5},
{0Xd0418CFE,0Xd2438CFE,0Xd4438CFE,0xD6438CFE,0xd8048CFE},
{0xFF, 0xFF, 0x8D, 0xFE, 0x9B, 0x3F, 0x79, 0x83,0xFF, 0xA7, 0xFF, 0x7F, 0x00, 0xE0, 0xF7, 0x3E},
{0x11, 0xFF, 0x0, 0x22, 0x2D, 0xAE},
0,
0x1,
0x5,
0x0e,
0xFFFFFFFF,
0x30,
0x3f,
0,
0x65,
0,
0,
{0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000}
}

